Intended use
When used for its intended purpose, this tool corresponds to the state of the art,
as well as to the current safety requirements at the time of its introduction.
The tool is intended for longitudinal and cross-cutting of solid wood, coated wood,
chip board, block board and similar woodlike materials. Round work pieces may
not be sawed since they can be twisted by the rotating saw blade.
Only materials may be processed for which the corresponding saw blade
is approved. The product must not be used for sawing firewood.
Only saw blades suitable for the device (HM saw blades) may be used. The use
of HSS saw blades and cut-off wheels of any type is forbidden.
The tool is not suitable for commercial or industrial use.
Any other type of use is inappropriate. Improper use or modifications to the tool
or the use of components that are not tested and approved by the manufacturer
may result in unforeseen damage!
Any use that deviates from its intended use and is not included in these
instructions is considered unauthorised use and relieves the manufacturer from
his or her legal liability.
WARNING:
Before using your table saw, read the instruction
manual carefully.
WARNING:
Carefully remove the table saw from the carton and
remove the protective foam from around the motor.
WARNING: Risk of injury!
Do not connect to the power supply before assembly, adjustment
and maintenance.
Before you start
MSTS1500-A
by
MacAllister
Getting
started...
19
EN
