4
The high pressure stream of water that this
equipment produces can pierce skin and
its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure, even
when engine is stopped and water is
disconnected, which can cause injury.
• NEVER aim spray gun at people, animals or plants.
• DO NOT allow CHILDREN to operate pressure washer.
• NEVER repair high pressure hose. Replace it.
• NEVER repair leaking connections with sealant of any
kind. Replace o-ring or seal.
• Keep high pressure hose connected to pump and spray
gun while system is pressurized.
• ALWAYS point gun in safe direction and squeeze spray
gun trigger, to release high pressure, every time you
stop engine. Engage trigger lock when not in use.
High pressure spray can cause paint chips
or other particles to become airborne.
• Always wear safety goggles when using this equipment
or in vicinity of where equipment is in use.
• Before starting the pressure washer, be sure you are
wearing adequate safety goggles.
Unintentional sparking can result
in fire or electric shock.
WHEN ADJUSTING OR MAKING REPAIRS TO
YOUR PRESSURE WASHER
• Disconnect spark plug wire from spark plug and place
wire where it cannot contact spark plug.
WHEN TESTING FOR ENGINE SPARK
• Use approved spark plug tester.
• Do not check for spark with spark plug removed.
Starter and other rotating parts can
entangle hands, hair, clothing, or
accessories.
• DO NOT wear loose clothing, jewelry or anything that
may be caught in the starter or other rotating parts.
• Tie up long hair and remove jewelry.
CAUTION
Excessively high or low operating speeds
increase risk of injury and damage to
pressure washer.
• DO NOT tamper with governed speed.
• DO NOT operate pressure washer above rated
pressure.
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• DO NOT secure spray gun in open position.
• DO NOT leave spray gun unattended while machine is
running.
• NEVER use a spray gun which does not have a trigger
lock or trigger guard in place and in working order.
• Always be certain spray gun, nozzles and accessories
are correctly attached.
CAUTION
High pressure spray may damage fragile items
including glass.
• DO NOT point spray gun at glass when in jet spray
mode.
• NEVER aim spray gun at plants.
Improper treatment of pressure washer can damage it
and shorten its life.
• NEVER operate units with broken or missing parts, or
without protective housing or covers.
• DO NOT by–pass any safety device on this machine.
• Before starting pressure washer in cold weather, check
all parts of the equipment to be sure ice has not formed
there.
• NEVER move machine by pulling on hoses. Use handle
provided on unit.
• Check petrol system for leaks or signs of deterioration,
such as chafed or spongy hose, loose or missing
clamps, or damaged tank or cap. Correct all defects
before operating pressure washer.
• This equipment is designed to be used with authorized
parts only. If equipment is used with parts that DO NOT
comply with minimum specifications, user assumes all
risks and liabilities. Call the technical helpline at
0845 300 2577 for information.
