Page No.5
+1 888 818 2814
[email protected]
www.MabruRV.com
+1 888 818 2814
[email protected]
www.MabruRV.com
4
12V AC Controls
1.
To turn the unit on locate the bu�on
and press until screen
powers on.
2.
To adjust the blower
speed,
locate the
button until the desired speed is selected.
3.
The 12V Rooftop Air Conditioning unit comes with 3 different power modes. To change
the mode of the unit press then
M
on the unit to cycle between the 3 modes.
Modes
Max
se�ing is the largest energy consuming mode and will provide the most
cooling in the shortest amount of time.
setting is the medium
cooling se�ing and recommend for
routine use.
ECO
se�ing is the energy saving mode that uses the minimum number of amps
while providing cooling at a less efficient rate.
4.
To view the current voltage being used by the unit. Simply press and hold the
M
button
for 6 seconds and the voltage value will appear on the screen. To exit the current
voltage mode, do not press any buttons for 6 seconds and the unit will return the main
menu automatically.
5.
The display will always show the set temperature
. The possible temperate ranges on the
unit vary between 5
-40 degrees Celsius (
Note: the units only come with temperature
se�ings in Celsius
). To view the current
inlet temperature, press the
↑
symbol for 6
seconds and the screen will display the temperature in Celsius. To view the current
outlet temperate press the
↓
for 6 seconds and the screen will display the temperature
in Celsius.
High Mode
Normal Cooling Mode
A/C On/Off Indicator
Fan On/Off Indicator
Fan Speed
System Inspect Indicator
Low/Economy Mode
Page No.5
1. To turn the unit on locate the button and press until screen powers on.
2. To adjust the blower speed, locate the button until the desired speed is selected.
3. The 12V Rooftop Air Conditioning unit comes with 3 different power modes. To change the mode of the
unit press then M on the unit to cycle between the 3 modes.
Modes
• Max setting is the largest energy consuming mode and will provide the most cooling in the shortest
amount of time.
• setting is the medium cooling setting and recommend for routine use.
• ECO setting is the energy saving mode that uses the minimum number of amps while providing cooling
at a less efficient rate.
4. To view the current voltage being used by the unit. Simply press and hold the M button for 6 seconds and
the voltage value will appear on the screen. To exit the current voltage mode, do not press any buttons for
6 seconds and the unit will return the main
menu automatically.
5. The display will always show the set temperature. The possible temperate ranges on the unit vary
between 5-40 degrees Fahrenheit (Note: the units only come with temperature settings in Fahrenheit). To
view the current inlet temperature, press the symbol for 6
seconds and the screen will display the temperature in Fahrenheit. To view the current outlet temperate
press the for 6 seconds and the screen will display the temperature in Fahrenheit.
+1 888 818 2814
[email protected]
www.MabruRV.com