41
solid door
3
REVERSE THE DOOR PANEL
IMPORTANT: Note the location of the hinge
before removing:
Secure hinges on the opposite side of the door
handle, using the same 4 hinge screws. Secure the
other two screws on the door handle side.
Rotate the door
panel 180°
Place all door
parts together.
4
REVERSE THE PLATE AND THE
LOCK PLATE OF THE DOOR PANEL
5
REINSTALL THE DOOR
glass door
1
BEFORE YOU BEGIN
Unplug the dryer from electrical current.
2
REMOVE THE DOOR
Open the door to approximately 90 degrees.
Remove the bottom screw from each hinge.
Insert these screws about half way into the UPPER
holes of each hing on the other side. Loosen upper
screw from each hinge. Remove the door from the
dryer by lifting it up and out. Remove the two
remaining screws and keep them in site.
Rotate the door panel 180 degrees and reinsert
the inner door into the door panel.
Unscrew both the plate and the lock plate (the
one with a lock and the one without); reinstall the
former in place of the latter and vice versa.
The door is now ready to be installed to the dryer.
Insert each hinge to the two partially fastened
screws. Secure the lower screws (remaining from
step 2) and tighten the upper screws.
55
