39
note: elbows prevent duct folding
and collapsing.
LEVELING THE DRYER
NIVELE DEL FRENTE HACIA
LA PARTE TRASERA
NIVELE LADO A LADO
4 PATAS NIVELADORAS
2 PATAS ANTI-LADEOS
ACOMODE LA SECADORA EN SU POSICIÓN
VERTICAL CERCA DE SU UBICACIÓN FINAL Y
AJUSTE LAS 4 PATAS NIVELADORAS DE MANE-
RA QUE LA SECADORA IGUALE LA ALTURA DE
SU LAVADORA. AJUSTE LAS 2 PATAS ANTI-LA-
DEOS DE MANERA QUE HAGAN CONTACTO
FOR
STRAIGHT
LINE
INSTALLATION, CONNECT
THE DRYER EXHAUST TO
THE WALL USING DUCT
TAPE.
RECOMMENDED
CONFIGURATION
TO MINIMIZE
EXHAUST
BLOCKAGE.
ELBOW HIGHLY
RECOMMENDED.
ELBOW HIGHLY
RECOMMENDED.
using flexible metal duct
•
Use the shortest length possible.
•
Extend duct to reach maximum length.
•
Do not bend or crush it.
•
Never use duct in walls or inside the dryer.
•
The dryer ventilation must comply with local
construction codes.
•
Avoid resting the duct on sharp objects.
correct
If rigid metal duct can not be used, then a flexible
metal duct may be used, but it will reduce the
maximum recommended length. A listed UL duct
may be used in special installations when it is not
possible to perform connections with the
recommended specifications. The use of this duct
will affect drying cycles. If flexible duct needs to be
used, then the following instructions must be followed:
STAND THE DRYER UPRIGHT NEAR THE FINAL
LOCATION AND ADJUST THE 4 LEVELING LEGS
TO EQUAL THE WASHER HEIGHT . ADJUST THE 2
ANTI-TILTING LEGS SO THEY TOUCH THE FLOOR.
LEVEL FRONT
TO BACK
LEVEL SIDE TO
SIDE
4 LEVELING LEGS
2 ANTI-TILTING LEGS
DO NOT USE
EXCESSIVE
EXHAUST LENGTH
DO NOT SIT
DRYER ON
FLEXIBLE
EXHAUST
DO NOT
CRUSH
FLEXIBLE
EXHAUST
AGAINST
THE WALL
ELBOW HIGHLY
R
ECOMMENDED.
ELBOW HIGHLY
RECOMMENDED.
incorrect
53
