77
c
leaning
th
e
tr
a
y
Firstly, open the front door where
1.
you see a small lip on the right-hand
side. Pull the door towards you until
completely open.
Then, to remove the ice-tray from its
2.
fitting, take it by the right-hand side
and at the same time, pull it down and
towards you. Finally, pull it out by the
centre, keeping it horizontal.
To replace the ice-tray in the
3.
Smart Fill
Ice Factory
, align the short sides with
the lateral fittings and push it until it’s
completely inserted.
Afterwards, push the tray by the
4.
right-hand side until you hear a click,
which will ensure the tray securely in
place while working.
Close the lid of the
5.
Smart Fill Ice
Factory
. Your device will be ready for
use once again.
im
p
o
rt
an
t:
Use tepid water to remove residual ice which will form with
regular use of the
Smart Fill Ice Factory
. This residue could form on the lid
you use to fill the water cylinder, the cylinder valve, and the ice-box, thus
affecting the working of different parts of the system.
Don’t use ice-picks, forks, or knives to remove the residual ice as to do so
could damage the
Smart Fill Ice Factory.
Summary of Contents for RMM1540Y
