mabe RMC090NESY0, Instruction Manual

Page: 21 / 37

20
Installation instructions
Remove tape and any labels
from your refrigerator before
using (except the rating label).
To remove any remaining tape
or glue, rub the area briskly with
your thumb.
Tape or glue residue can also be
easily removed by rubbing a
small amount of liquid dish
soap over the adhesive with
your fingers. Wipe with warm
water and dry.
Do not use sharp instruments,
rubbing alcohol, flammable
fluids, or abrasive cleaners to
remove tape or glue. These
products can damage the
surface of your refrigerator.
•
•
•
When moving the refrigerator,
do not tilt it at an angle larger
than 45° from its upright
position
.
•
cleaning before using the unit
space requirements
After you remove all packaging materials, clean the inside of your
refrigerator.
To ensure proper ventilation for
your refrigerator, allow 200 mm
space on each side between
walls,100 mm space between
back of your refrigerator and the
wall, and 300 mm space above
the top.
• •
•
If you are installing your
refrigerator next to a wall,
leave sufficient space on the
hinge side to allow for the
door to open.
Never install your refrigera-
tor near heat sources or in a
place where it will be
exposed to direct sunlight.
Warning: keep flammable materials and vapors such as
gasoline, away from the refrigerator. Failure to do so, could
result in death, explosion, fire or burns.
Warning: Use two or more people to move the refrigerator.
failure to do so, could result in back injuries or other injuries.