7
FUNCTION TEST SEQUENCE
This is a functional test for the dryer. To activate this mode, perform the following steps:
1. Turn the cycle selector knob to the 12 o’clock position.
2. Press and hold the
SELECT
and
PAUSE CANCEL
buttons simultaneously for 6 seconds.
3. Immediately after, press and hold the
PAUSE CANCEL
and
START
buttons for 4 seconds.
The control will enter the test mode, the buzzer will sound 3 times and all LEDs will rapidly
flash.
After entering the test mode, the selector can now be rotated to select the following tests:
1 Turn
Drive motor runs; heat source is on.
DRYING
LED is lit. Control thermistor
reading is displayed. **
2 Turns
Drive motor runs; heat source is off.
COOL DOWN
LED is lit.
3 Turns
Drive motor runs; heat source is off.
DRYING
and
COOL DOWN
LEDs are lit.
The
MORE DRY
LED should be ON. Opening the door (press in on door switch plunger) and
placing a finger on both moisture sensor bars at the same time will make the
DAMP
LED
come on.
mabe CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE. January 2007
