and while the command is running connect the power supply. This command will wait for the bootloader
response and try to recover the firmware. If the flashing does not occur in the first power cycle you can
repeat it until the bootloader is detected. The example output of the wait option for the ak80-64 motor is
shown below:
4.5. CANdle update tool - MAB USB Flasher
MAB_USB_Flasher
is a console application used to update the CANdle so ware using USB bus.
Currently, only updates over USB are supported (updates over SPI and UART are not supported). When an
update is released our engineers will prepare a MAB_USB_Flasher application and send it to you. To update,
first turn off all applications that may be using CANdle, and simply run
./MAB_USB_Flasher.
A er a successful update, the CANdle device is ready.
www.mabrobotics.pl
