MA lighting SCANCOMMANDER, User Manual

Page: 59 / 129

Scancommander Scancommander Scancommander Scancommander Scancommander
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander
59 59
59 59
59
00:00:12:23
FINE
(053)
MODIFY ON
DELETE
EVENT
RECORD:
NEW
RECORD
INSERT
OVERWRITE
009 00 : 00 : 10 : 05 MEM. A/02
010 00 : 00 : 10 : 15 MEM. A/03
011 00 : 00 : 11 : 02 SEQU. 01
012 00 : 00 : 11 : 03 GO +
013 00 : 00 : 12 : 15 MEM. B/02
RECORD
Switching off the button will terminate recording.
Beside recording a new show, the Scancommander offers different modes to
complete or replace parts of an already stored show. Three options can be
selected when recording (Time Code ON and RECORD selected) :
INSERT
OVERWRITE
INSERT mode selected
Memory, Chaser, Sequenz, Enable, GO+ and GO-
The already stored show is played back syn-
chronously to the music and every new play-
back command, selected by its button, will
insert a new event.
Memory, Chaser, Sequenz, Enable, GO+ and GO-
Within the recorded period all old events are
erased. To keep parts of a show, RECORD has
to be switched off before the running Time Code
reaches this period.
OVERWRITE -
RECORD : NEW mode selected
(like explained for recording a new show)
RECORD:
NEW
INSERT
OVERWRITE
Memory, Chaser, Sequenz, Enable, GO+ and GO-
The old show is played back and keeps un-
changed. The first push of a playback button
starts the record mode and all following events
are erased until Record is switched off.
OVERWRITE -
RECORD : PRESET mode selected.
RECORD:
PRESET
INSERT
OVERWRITE
List of Time Code events
Terminate record mode
Insert additional events
Overwrite starting with the
first modification
Overwrite parts of a show
FRAMES
3 0