8
MA Lighting Technology GmbH . Dachdeckerstr. 16 . 97297 Waldbüttelbrunn . Fax: +49 931 4979429 . www.malighting.de
Note: Mode 4, 5, 6, 9 without function!
3.
Controlling the Scancommander
3.1
Using Program Change data (Mode 7)
Memories and pages will be called up together
To control the MA Scancommander by program change data please set the 3rd code switch to
"7".
The other two turning wheels must be set to the used Midi channel.
MIDI-IN can be connected for example to a MIDI footswitch or a synthesizer. The MIDI cable
must be connected to MIDI OUT of the keyboard.
The MA Scancommander (MIDI IN) will be connected to the MIDI OUT of the converter.
The following functions can be done (for a table of the notes of a keyboard see chapter 6):
Program Change 0
controls
Memory 1 & Page A
Program Change 1
controls
Memory 2 & Page A
etc.
....
....
Program Change 100
controls
Memory 11& Page C
Program Change 101
controls
Sequence 1
Program Change 102
controls
Sequence 2
etc. etc.
up to 116
controls
Sequence 16
Program Change 126
controls
Go+
Program Change 127
starts
Go-