4
MA Lighting Technology GmbH . Dachdeckerstr. 16 . 97297 Waldbüttelbrunn . Fax: +49 931 4979429 . www.malighting.de
2.
Controlling Lightcommander 12/2, 24/6, 48/6
2.1
Using Program Change Data (Mode 0)
Memories and pages can be called up separately
To control the MA Lightcommander by Program-Change Data please set the 3rd code switch
to "0".
The other two turning wheels must be set to the used Midi channel.
MIDI-IN can be connected for example to a MIDI foot switch. The MIDI wire must be con-
nected to MIDI OUT of the foot switch.
The MA Lightcommander (MIDI IN) will be connected to the MIDI OUT of the converter.
The following functions can be done:
Attention: Within this mode active memories will be switched off when the following
memory is called up (KILL mode).
An already running chaser can only be stopped by calling an "empty" chaser.
Fading memories is not possible.
Program-Change 0
controls
Memory 1 (actual page)
Program-Change 1
controls
Memory 2 (actual page)
etc.
....
....
Program-Change 15
controls
Memory 16 (actual page)
Program-Change 17
controls
Page 0 (LC12) resp. Page A (LC24)
Program-Change 18
controls
Page 1 (LC12) resp. Page B (LC24)
etc. etc.
up to 26
....
....
....
Program-Change 27
starts
Chaser No. 1 (Attention, no step!)
Program-Change 28
starts
Chaser No. 2 (Attention, no step!)
etc. etc.
up to 76
....
Chaser No. 50 (Attention, no step!)
Program-Change 77
controls
manual step
Program-Change 80
controls
automatic step "OFF"
Program-Change 81
controls
quick automatic step
Program-Change 82
controls
slightly slower automatic step
etc.
....
....
Program-Change 87
controls
very slow automatic step