M7 DD1813, Manual

Page: 23 / 44

1
DESCRIPTION OF THE TOOL
OPERATING CONTROL
The tool is intended to screw-in and loosen bolts and screws, as well as to tighten and loosen
nuts within the respective range of dimension. It also can drill holes on wood, metal and
plastics.
1. MAIN PARTS
1. Variable speed trigger switch
2. LED Worklight
3. Chuck jaws
4. Direction-of-rotation selector
5. Battery
6. Battery pack release button
7. Power bar
8. Ratcheting keyless chuck
9. Torque adjustment clutch
(DH1826 with impact function)
10. Two speed gear box
11. Vents
12. Auxiliary handle(only for DD1813)
NOTE:
1) Attach the battery pack on the charger for short charging to resume the battery, when the battery
pack is protected as the redundant current and high temperature.
2) For continuous long operation, the tool may be hot, cool it down to appropriate temperature before
reuse, otherwise, man damage the tool.