Rev 8-15-2013
www.m7tuning.com
Page 2 of 2
M7 Tuning
Ultimate MINI Performance
CAUTION:
STEPS 3 and 4 MUST BE DONE WITH WEIGHT ON THE WHEELS-DO NOT
ATTEMPT TO DO IT WITH THE CAR JACKED UP AND NO WEIGHT ON THE
WHEELS
3) Using the 13mm socket, remove the 6 nuts at the top of the strut towers (3 on
each side).
Line up the holes of the strut tower plates with the bolts from the struts and place
the Strut Tower plates over the strut towers. The M7 Logo and machined pocket
should be towards the center of the car and the logo is in a readable position.
4) Using the same 6 nuts from step 3, secure the M7 Strut Tower Plates to the strut
towers and torque down to
25 lb-ft
(34 Nm)
each. Do not attempt to tighten over
this specification as it may cause damage to your struts.
If you have questions or need additional technical support, please email
or call our office at 704-663-0094 Monday – Friday, 9:00am – 4:00pm EST.
Enjoy the Ride……………………
Team M7
