M3 Mobile MM3, User Manual

Page: 71 / 76

71
User Manual
MM3
To use the Scanner
Scanner Manual
To scan the barcode, there are two scanner programs installed on the device •
Scanner
M3 ScanTest •
It is a sample test program. It is only for testing the scanning feature of the device. It can not -
be used for business application.
ScanEmul •
It is a program which can be used to output the scanned data on the application. -
(like MS
Word-Pad, Internet Explorer or Business Application)
The ScanEmul program must be running if you want to scan barcodes. -
Scan Test
This program is located under • Flash Disk > Scanner folder .
You need to select this tab to
configure Settings.
The Scanned Data will be
displayed here.
It is to trigger the scan beam.
You can also Use ‘S’ button
on the right side of Device to
trigger it.