MANUNTA
BY M2Tech
www.manunta-audio.com
EVO Phono 3
Phono PreamplifiER
REVISION P
R
A – November 2022
3. Back Panel
Figure 2
9) Chassis post.
Connect earth wire from the turntable. You might also use this post to
connect the
Evo Phono 3
to earth if some hum is heard when listening to records. Gold-
plated post.
10) MC input impedance pot.
Set the MC input impedance to the value recommended by
the cartridge’s user manual. Please note that if the cartridge’s internal impedance Z is
indicated, a good setting for this pot is 10-20 times Z.
11) MC input.
Connect a low output cartridge. Gold plated RCA socket.
12) MM input.
Connect a medium-to-high output cartridge or a step-up transformer for a
low-output MC cartridge. Gold plated RCA socket.
13) Output.
Connect to any line-level input of an integrated amplifier or preamplifier. Do
NOT connect to a phono input. Gold plated RCA socket.
14) Power supply input.
Connect the connector from the stock 15V adaptor or from the
Evo Supply 3
or
M2Tech Van Der Graaf MkII
. 5.5/2.1mm barrel jack with positive on tip.
Copyright © 2022, M2Tech Srl
11
