M2M IDG701AM-0T001, User Manual

Page: 127 / 400

M2M Cellular Gateway
Index skipping is used to reserve slots for new function insertion, when required.
127
It means the option “Protocol” of packet filter rule is TCP.
Public Port selected a predefined port from Well ‐ known Service , and
Private Port is the same with Public Port number.
Public Port is selected Single Port and specify a port number, and Private
Port can be set a Single Port number.
Public Port is selected Port Range and specify a port range, and Private
Port can be selected Single Port or Port Range .
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to
Scheduling setting under System )
Then check Enable box to enable this rule.
When “ UDP ” is selected
It means the option “Protocol” of packet filter rule is UDP.
Public Port selected a predefined port from Well ‐ known Service , and
Private Port is the same with Public Port number.
Public Port is selected Single Por t and specify a port number, and Private
Port can be set a Single Port number.
Public Port is selected Port Range and specify a port range, and Private
Port can be selected Single Port or Port Range .
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to
Scheduling setting under System )
Then check Enable box to enable this rule.
When “ TCP & UDP ” is selected
It means the option “Protocol” of packet filter rule is TCP and UDP.
Public Port selected a predefined port from Well ‐ known Service , and
Private Port i s the same with Public Port number.
Public Port is selected Single Port and specify a port number, and Private
Port can be set a Single Port number.
Public Port is selected Port Range and specify a port range, and Private
Port can be selected Single Port or Port Range .
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to
Scheduling setting under System )
Then check Enable box to enable this rule.
When “ GRE ” is selected
It means the option “Protocol” of packet filter rule is GRE.
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to
Scheduling setting under System )