Industrial BOX-HMI Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
14 / 16
(4) Use the cable more than 4mm
2
. Put the point of the ground near product and shorten Ground line.
7.3 Installation of Cable Clamp
Caution: This cable clamps are installed for preventing disconnection and electronic sparks by loosen or
breaking out of port and cable. Users should be well-informed about following guide.
(1) Put HDMI or USB cables through cable clamp as following image.
(2) Tighten the cable and clamp as following image, and use screw and bolt to fix the clamp to a product.
Chapter 8 Maintenance
8.1 Case Cleaning
Use soft cloth wet by detergent to wipe dirty surface of case out.
8.2 Periodic Check Points
Check the followings periodically for best condition of the device.
(1) Environment
1) Is the operating temperature within the allowable range (-10°C~50°C)?
2) Is the operating humidity within the allowable range (10%~80%RH)?
3) Is the Surrounding pollution no corrosive gas?
(2) Power
1) Is the input power in right range?
(3) Related Items
1) Check the touch pad there is no damage, scratch or pollution by eye.
