background image

DESCRIPTION QTY 

 

BOOM SECTION, 1 X .058 X 60” STR .......................................... 1 
BOOM SECTION, 1 X .058 X 57” STR .......................................... 1 
BOOM SECTION, 1-1/4 X .058 X 60" SBE .................................... 1 
BOOM SECTION, 3/4 X .049 X 17" STR ....................................... 1 
ELEMENTS, 3/16 ROD x Dimension Sheet .................................. 39 
DRIVEN ELEMENT ASSEMBLY, (917ISP DE ASSY) .................. 1 
BOOM-TO-MAST "L" PLATE ......................................................... 1 
U-BOLT AND CRADLE, 2"............................................................. 2 
U-BOLT AND CRADLE, 1-1/2” ...................................................... 2 
ASSEMBLY MANUAL .................................................................... 1 
 

IN HARDWARE BAG: 

BUTTON INSULATORS ................................................................ 80 
SHAFT RETAINER, SS ................................................................. 80 
NUT, 5/16-18 SS ............................................................................ 8 
LOCKWASHER, 5/16 SS ............................................................... 8 
SCREW, 8-32 X 1-3/4 SS .............................................................. 2 
SCREW, 8-32 X 1-1/2 SS .............................................................. 4 
SCREW, 8-32 X 1-1/4 SS .............................................................. 2 
LOCKNUT, 8-32 SS ....................................................................... 8 
SCREW, 8-32 X 1-1/4" SS ............................................................. 1 
CABLE TIE, NYLON ...................................................................... 4 
PUSH TUBE, 3/8 X 3” .................................................................... 1 

 

 

 

 

MANUFACTURED IN THE U.S.A. BY: 

 

M

2

 ANTENNA SYSTEMS, INC. 

4402 N. Selland Ave. 

Fresno, CA 93722 

(559) 432-8873  Fax: 432-3059 

www.m2inc.com

 Email: 

[email protected] 

 
 

902-14WLC PARTS & HARDWARE 

Summary of Contents for 902-14WLC







Reviews: