[ 5 ]
MOUNTING THE FRAME
Set up the side panels, then unfold the front and rear chassis and connect the parts with the
corresponding safety pins and secure the pins with the clamping spring.
For dismounting, follow these steps in reverse order.
CAUTION:
Be careful when folding and unfolding the trailer to avoid injuries.
ASSEMBLY OF THE DRAWBAR
Tilt the trailer back so that the bottom is completely visible. Remove the safety pin and loosen
the fi xing screw. Turn the coupling device 180 degrees. Reinsert the safety pin, secure it with the
clamping spring. Tighten the fi xing screw fi rmly.
To stow the trailer drawbar, reverse the steps and secure the safety pin with the clamping spring.
CAUTION:
Do not use the trailer without the safety pins attached correctly.
EN
