Premier Climax Steam Locomotive
9
Automatic Sound Effects
Certain Proto-Sound 2.0 sound effects automatically play in programmed conventional
mode conditions:
Squealing Brakes:
Play any time the engine's speed decreases rapidly.
Cab Chatter:
Plays at random intervals when the engine idles in neutral.
Engine Start-up and Shut-down:
Sounds play when the engine is initially
powered on or is powered off for five seconds or more.
Reset to Factory Default
To override the settings you currently have assigned to the engine and reset it to its
factory defaults, while in Neutral tap the Horn button quickly once, followed by five
quick taps of the Bell button, allowing approximately ½ second to lapse between each
quick button press. Two horn blasts will indicate that the engine has made the change.
Reset
Two Horn Blasts
(indicates change is made)
Repeat to Return
to Normal Condition
Horn
Place
Engine in
Neutral
=
Bell
Bell
Bell
Bell
Bell
Maintenance
To remove the boiler shell, remove the three screws indicated in figure 11a. Then
carefully separate the telescoping drive shaft sections while separating the boiler and
the chassis.
To remove the tender shell remove the four screws shown in figure 11b.
