manualshive.com logo in svg

M.T.H. Premier Chapelon 2-3-1E Pacific, Operator'S Manual

Share
Download
M.T.H. Premier Chapelon 2-3-1E Pacific Operator'S Manual Download Page 7

Proto-Coupler Installation

Owners of  2-rail models who intend to run this locomotive on a 3-rail layout may 
wish to use the M.T.H. Proto-Coupler so that they may enjoy the remote 
uncoupling anywhere on the layout. 
A Proto-Coupler and the necessary mounting hardware are included in the 
packaging with each 2-rail locomotive. The wire harness in the tender is prewired 
with a plug-in connection for the Proto-Coupler.
To install the Proto-Coupler on a 2-rail tender, follow the step by step instruction 
listed below.

- First remove the Fine Scale European Coupler and pilot beam from the bottom 
of  the tender chassis.
- Install the optional pilot beam with no coupler installed
- Next remove the shell from the tender by removing the 4 body screws and then 
unplug the wire harness between the shell and the chassis.

Premier Chapelon 2-3-1E Pacific Steam Locomotive

7

Remote Controlled Proto-Coupler

Optional Tender Couplers

Ace Trains Coupler

Kadee® Coupler Bracket Installed

Summary of Contents for Premier Chapelon 2-3-1E Pacific































Reviews:

No comments

Brands by name

Popular brands

Load more brands