13
Premier Burlington Zephyr Diesel Engine
5. After repeating the procedure for the other motor, reassmble the chassis and
body, being careful that the wire harnesses are not caught between the chassis
and body and reinstall the chassis screws.
Lubricate the outside truck block idler and drive gears with grease. Use the
diagram shown in Fig. 9 below as a guide and add grease to the points marked
with a “G.”
Periodically check the locomotive wheels and pickups for dirt and buildup,
which can cause poor electrical contact and traction as well as prematurely
wear out the neoprene traction tires.
Body Mount Screws
Motor Mount Screw
Body Mount Screws
Grease Idler Gear (G)
Figure 9. Location of Body Mount Screws and Greasing Points on the Locomotive
