SM10
P. 7 / 8
EM-6342-B
http://www.m-system.co.jp
SETTING MODE
Press and hold IND button for longer than 3 seconds to enter Setting Mode. Various parameters can be adjusted in this mode.
■
RETROACTIVE TIME (range: 0
−
30 seconds)
1) Confirm that the unit is in the setting mode.
2) Press IND button one or more times to choose the LED RA turned on.
3) Use UP/DOWN button to set a desired value on the digital meter.
4) Press IND button to move on to the next item.
■
TRANSITION RAMP RATE (range: 0
−
30 seconds)
1) Confirm that the unit is in the setting mode.
2) Press IND button one or more times to choose the LED RR turned on.
3) Use UP/DOWN button to set a desired value on the digital meter.
4) Press IND button to move on to the next item.
Refer to the next page for the definitions of Retroactive Time and Transition Ramp Rate.
■
LED BRIGHTNESS (range: 1, 2, 3)
1) Confirm that the unit is in the setting mode.
2) Press IND button one or more times to choose the LED RA in blinking state.
3) The digital meter shows the present setting.
4) Use UP/DOWN button to set a desired value on the digital meter.
5) Press IND button to move on to the next item.
IND
Press to choose
the setting item
Setting complete
IND
Press
Press to increase/decrease value
Press both buttons at once
to increase increment speed
ON
RA
IND
Press to choose
the setting item
Setting complete
IND
Press
Press to increase/decrease value
Press both buttons at once
to increase increment speed
ON
RR
IND
Press to choose
the setting item
Setting complete
IND
Press
Press to increase/decrease value
Press both buttons at once
to increase increment speed
Digital
Meter
Blinking
RA
