R8-FS16N
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax:
+81(6)6659-8510 E-mail: [email protected]
EM-9791
P. 2 / 5
• Protective Cover
Groove
Hook
The protective cover is to be attached over the connected
I/O module
at the right end.
Align the hooks on the cover with the grooves of the module
and slide it
straight until the hooks are latched.
When removing the cover, pull it out while squeezing the
hooks inward.
■
HOW TO UNMOUNT THE MODULE ON DIN RAIL
Release the locking clamps and pull out straight the mod-
ule.
• Removing an intermediate module
Caution !
1 ) Be careful not to hurt your hand by pointed edges of
the internal communication bus connector.
2 ) I/O modules cannot hold tightly on the DIN rail by
themselves without power/network module.
Secure them to the position if necessary by using DIN
rail end plates.
