R7K4DH-1-DAC32D
P. 2 / 5
EM-7796-H Rev.1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
■
STATUS INDICATOR LED
ID
COLOR
FUNCTION
Power
Green
Turns on when the internal 5V is supplied
normally.
Run
Green
Turns on when the refresh data is received
normally.
■
DISCRETE I/O STATUS INDICATOR LED
LED indicators show I/O signal status.
Contact ON: LED ON (red)
Contact OFF: LED OFF
■
STATION ADDRESS
The left switch determines the sixteenths place digit, while
the right switch does the ones place digit of the address.
(Range: 01H to 3FH)
Station Address Setting (x1)
Station Address Setting (x10)
0123
45
678
9AB
C
D
EF
0123
45
678
9AB
C
D
EF
■
OPERATING MODE
• Transfer rate (SW1)
SW1-1
SW1-2
TRANSFER RATE
OFF
OFF
12Mbps (*)
ON
OFF
6Mbps
OFF
ON
3Mbps
• Output at the loss of communication (SW1)
SW1-3
OUTPUT AT THE LOSS OF COMMUNICATION
OFF
Hold the output (*)
(maintains the last data received normally)
ON
Reset the output (turned off)
(*) Factory setting
Caution ! -
SW1-4 through 1-8 are unused. Be sure to turn off
unused ones.
■
TERMINATING RESISTOR
To use the terminating resistor, turn the switch ON, and
OFF to invalidate. (Factory setting OFF)
■
POWER SUPPLY
Cable connector
: TFMC1,5 / 5–STF–3,5
(Phoenix Contact) (included in the package)
Applicable wire size
: 0.2 − 1.5 mm
2
; stripped length 10 mm
Recommended solderless terminal
• AI0,25−10YE 0.25 mm
2
(Phoenix Contact)
• AI0,34−10TQ 0.34 mm
2
(Phoenix Contact)
• AI0,5−10WH 0.5 mm
2
(Phoenix Contact)
• AI0,75−10GY 0.75 mm
2
(Phoenix Contact)
• A1−10 1.0 mm
2
(Phoenix Contact)
• A1,5−10 1.5 mm
2
(Phoenix Contact)
1
2
3
4
5
1. PWR+
2. PWR–
3. FE
4. SNSR.EXC+
5. SNSR.EXC–
Power Supply
Power Supply
Functional earth
Sensor excitation
Sensor excitation
Not
e: The numbers marked on the connector have no relationship
to the pin number of the unit.
Wi
re according to the instruction manual of the unit.
1. NC
2. NC
3. TXD+
4. TXD–
5. RXD+
6. RXD–
7. NC
8. SLD
Unused
Unused
Network (slave, transm)
Network (slave, transmission –)
Network (master, transm)
Network (master, transmission –)
Unused
Shield
■
NETWORK
Recommended cable connector
: TM21P–88P (Hirose Electric)
(not included in the package)
•
Full-duplex communication
•
Half-duplex communication
12345678
12345678
1. NC
2. NC
3. TR+
4. TR–
5. NC
6. NC
7. NC
8. SLD
Unused
Unused
Network (+)
Network (–)
Unused
Unused
Unused
Shield
