R7G4HEIP-6-DC16A
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-8004-B P. 5 / 6
MOUNTING REQUIREMENTS
unit: mm (inch)
140(5.51)
2−M4
WIRING INSTRUCTIONS
■
TORQUE
Wiring screw for separable terminal: 0.5 N m
Fixing screw for separable terminal: 0.5 N m
■
SOLDERLESS TERMINAL mm (inch)
Refer to the drawing below for recommended ring tongue
terminal size. Spade tongue type is also applicable. Solder-
less terminals with insulation sleeve do not fit.
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
Applicable wire size: 0.25 – 1.65 mm
2
(AWG 22 – 16)
6 (.24) max
3.3 (.13) max
mm (inch)
■
HOW TO UNMOUNT THE SEPARABLE TERMINAL
The separable terminal of the unit is a 2-piece construc-
tion. It is possible to remove the terminal by loosening two
screws of terminal alternately.
