background image

R7F4HEIP-DC16B

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201  Fax: +81(6)6659-8510  E-mail: [email protected]

EM-8005-C  P. 2 / 7

COMPONENT IDENTIFICATION

IP Address Setting Rotary SW

RJ-45 Modular Jack

Status Indicator LED

PC Configurator Jack

Discrete Output Status Indicator LED

Sensor Exc. / Output Connectors

Power Supply Connector

 

STATUS INDICATOR LED

ID

STATUS

COLOR FUNCTION

PWR ON

Green

The internal power is supplied 
normally.

MS

ON

Green

Operating in a normal condition

Blinking Red

Duplicated IP address,
Internal data error

NS

ON

Green

Link on-line and connections in 
the established state

Blinking

Link on-line but no connections 
in the established state

ON

Red

Duplicated IP address

Blinking

Communication timeout

LNK1 ON

Green

LNK1 is established

LNK2 ON

Green

LNK2 is established

 

DISCRETE OUTPUT STATUS INDICATOR LED

LED green indicators shows the signal status.
  ON  : LED ON
  OFF : LED OFF

 

IP ADDRESS

Set the host address (2-digit hexadecimal number) in the 
IP address using rotary switches SA1 and SA2 for the first 
digit and the second digit, respectively.
When using the host address in the IP address set on the 
PC configurator software (model: R7CFG), set the switches 
to ‘00H’.
When the network address, Subnet Mask, and Default 
Gateway need to be changed, do so on R7CFG.
(Setting range: 00H – FFH)
(Factory setting: 00H)

IP Address   Host Address MSD (×1)

IP Address   Host Address LSD (×10)

012

34

56

789

AB

C

DE

012

34

56

789

AB

C

DE

 

POWER SUPPLY TERMINAL ASSIGNMENT

1 2 3 4 5

1. FE
2. NC
3. NC
4. +24V  
5. 0V

Functional Earth


Power Input (24V DC)

Power Input (0V)

Applicable connector: TFMC1,5 / 5–STF–3,5(Phoenix Contact)
                                    (included in the package)
Applicable wire size: 0.2 − 1.5 mm

2

; stripped length 10 mm

Recommended solderless terminal
• AI0,25-10YE 0.25 mm

2

 (Phoenix Contact)

• AI0,34-10TQ 0.34 mm

2

 (Phoenix Contact)

• AI0,5-10WH 0.5 mm

2

 (Phoenix Contact)

• AI0,75-10GY 0.75 mm

2

 (Phoenix Contact)

• A1-10 1.0 mm

2

 (Phoenix Contact)

• A1,5-10 1.5 mm

2

 (Phoenix Contact)

Summary of Contents for R7F4HEIP-DC16B








Reviews: