R7F4HEIP-DAC16C
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-8005-E P. 2 / 7
COMPONENT IDENTIFICATION
IP Address Setting Rotary SW
RJ-45 Modular Jack
Status Indicator LED
PC Configurator Jack
Discrete I/O Status Indicator LED
Sensor Exc. / I/O Connectors
Power Supply Connector
■
STATUS INDICATOR LED
ID
STATUS
COLOR FUNCTION
PWR ON
Green
The internal power is supplied
normally.
MS
ON
Green
Operating in a normal condition
Blinking Red
Duplicated IP address,
Internal data error
NS
ON
Green
Link on-line and connections in
the established state
Blinking
Link on-line but no connections
in the established state
ON
Red
Duplicated IP address
Blinking
Communication timeout
LNK1 ON
Green
LNK1 is established
LNK2 ON
Green
LNK2 is established
■
DISCRETE I/O STATUS INDICATOR LED
LED green indicators shows the signal status.
ON : LED ON
OFF : LED OFF
■
IP ADDRESS
Set the host address (2-digit hexadecimal number) in the
IP address using rotary switches SA1 and SA2 for the first
digit and the second digit, respectively.
When using the host address in the IP address set on the
PC configurator software (model: R7CFG), set the switches
to ‘00H’.
When the network address, Subnet Mask, and Default
Gateway need to be changed, do so on R7CFG.
(Setting range: 00H – FFH)
(Factory setting: 00H)
IP Address Host Address MSD (×1)
IP Address Host Address LSD (×10)
012
34
56
789
AB
C
DE
F
012
34
56
789
AB
C
DE
F
■
POWER SUPPLY TERMINAL ASSIGNMENT
1 2 3 4 5
1. FE
2. NC
3. NC
4. +24V
5. 0V
Functional Earth
—
—
Power Input (24V DC)
Power Input (0V)
Applicable connector: TFMC1,5 / 5–STF–3,5(Phoenix Contact)
(included in the package)
Applicable wire size: 0.2 − 1.5 mm
2
; stripped length 10 mm
Recommended solderless terminal
• AI0,25-10YE 0.25 mm
2
(Phoenix Contact)
• AI0,34-10TQ 0.34 mm
2
(Phoenix Contact)
• AI0,5-10WH 0.5 mm
2
(Phoenix Contact)
• AI0,75-10GY 0.75 mm
2
(Phoenix Contact)
• A1-10 1.0 mm
2
(Phoenix Contact)
• A1,5-10 1.5 mm
2
(Phoenix Contact)
