![background image](http://html1.mh-extra.com/html/m-system/r30ncit1/r30ncit1_instruction-manual_683715002.webp)
R30NCIT1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-8902 Rev.1 P. 2 / 16
COMPONENT IDENTIFICATION
Status Indicator LEDs
PC Configurator Connector
CC-Link IE TSN Communication
RJ-45 Modular Jack
IP Address / Station No. Rotary SW
■
FRONT VIEW
■
BOTTOM VIEW
■
SIDE VIEW
Specifications
Lock Tab
Base Fixing Screw
Positioning Guide
CN1
CN2
×16
×1
STATION No.
CONFIG
L ER
LINK
L ER
LINK
RUN
RD
SD
D LINK
ERR
■
STATUS INDICATOR LED
ITEM
ID
COLOR
FUNCTION
STATUS
DESCRIPTION
Status
Indicator
RUN
Green
Device State
ON
Normal
OFF
Indication of abnormality node
RD
Green
Receiving Data
ON
Receiving
OFF
SD
Green
Sending Data
ON
Sending
OFF
Unsent
D LINK
Green
Cyclic Transmitting
ON
In action
OFF
Not complied with
ERR
Red
Error
ON
Abnormality node
OFF
Normal
CN1
LINK
Green
CN1 Linking Up
ON
Linking up
OFF
Link-down
L ER
Red
CN1 Receiving Data
ON
Abnormality receiving data
OFF
Normality receiving data
CN2
LINK
Green
CN2 Linking Up
ON
Linking up
OFF
Link-down
L ER
Red
CN2 Receiving Data
ON
Abnormality receiving data
OFF
Normal
■
IP ADDRESS / STATION NO. SETTING ROTARY SW
Set the fourth octet of IP address and station No. with two rotary switches. The upper rotary SW sets the upper digits (MSB),
and the lower rotary SW sets the lowest digit (LSB) with hexadecimal (configurable range is 1 to 254).
Turn off the power supply when setting IP address / Station No. setting Rotary SW, as the setting is activated when turning
on the power supply.
Confirm available station numbers in the manual of the master unit (Factory default setting: 01H).
IP address: The first to third octet are common with the first to third octet of IP address for master station.
For setting MSB of Station No. (×16)
For setting LSB of Station No. (×1)
8
67
345
2
10
F E D C B A
9
8
67
345
2
10
F E D C B A
9
* Station No. setting example
IP address / Station No. setting rotary SW are set with hexadecimal.
For example, in the case of setting station No. 175, Set the Station MSB: A and LSB: F.