R30NCIT1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-8902 Rev.1 P. 10 / 16
■
CONSTRUCTION OF SYSTEM
The below figure shows an exemplary configuration of line connection.
USB cable
PC
GX Works3
Local
Station
Remote Station
(R30NCIT1)
Remote Station
CC-Link IE TSN
Master
Station
1) Master station, Local Station and Remote Station (R30NCIT1) are connected by Ethernet cable. CN1 and CN2 of CC-Link
IE TSN Network RJ-45 modular jacks can be connected in any order.
Before wiring, make sure to turn off the power of each unit.
2) After wiring is completed, turn on each unit.
■
CREATION OF PROJECT
Connect the PC and the master station, and create a project of the master station with GX Works3 installed in the PC.
1) Start GX Works3.
2) From the main menu, select [Project]
➞
[New] to create a new project.
Select
3) Select the series, type, and program language, and click OK.
Click
