25
�
�
�
�
�
�
�
�
�
� �
� �
� �
�
23
24
25
�
�
26
GB
CONVERSIONS
REPLACING THE INJECTORS
Our burners can be adapted to different types of
gas by simply installing the injectors suitable for the
gas you want to use. To help the installer, the table
on paragraph «TECHNICAL FEATURES»
. gives
the burner nominal heat input, injector diameter and
operating pressure of the different gas types.
Comply with the following instructions:
Injector replacement - Hob burners (fig. 25)
To change the injectors on the hob, remove the burner cup
and head and with a 7 mm Ø socket spanner replace them.
Injector replacement - Oven burner (fig. 23)
Remove oven base. Remove screw (D) which will release
burner and give access to the injector (C) . Unscrew injector
and replace it. Replace burner and replace screw (D).
Injector replacement - Grill burner (fig. 24)
Remove screw (D) which will release burner and give access
to the injector.Unscrew injector (C) and replace it. Replace
burner and replace screw (D).
After having replaced the injectors, it will be
necessary to proceed with burner adjustment
as explained in the previous paragraphs. The
technician must replace any seals after the
adjustments have been made.
INSTRUCTIONS FOR THE INSTALLER
CHANGING THE FLEXIBLE GAS HOSE
In order to guarantee that the gas hose is always in
excellent condition we strongly recommend changing
it on the date you will find printed on it.
REPLACING THE ELECTRICAL COMPONENTS
• The rear protection will have to be removed in order
to change the electrical heating elements, spit
motor, terminal board and power cable.
•
If you have to change the power cable (see the
cross section on table
paragraph «
TECHNICAL
FEATURES
»
), always keep the earth wire longer
than the phase wires and, in addition, follow
all the instructions given in the “ELECTRICAL
CONNECTION” paragraph.
• To change the oven lamp see the instructions on
«
REPLACING THE OVEN LAMP
» paragraph
• To change the lamp holder, remove the side panels
and then use a screwdriver to push the two locking
tabs and remove the lamp holder from the inside of
the oven.(fig.26)
• To change the eventual programming accessory,
thermostat, the commutator and the indicator lights,
remove the front panel as indicated in the previous
paragraph.
Downloaded from www.vandenborre.be
Summary of Contents for MFTW95IX
