![background image](http://html.mh-extra.com/html/m-system/mft-95-ix/mft-95-ix_instruction-for-the-use-installation-advice_3111369049.webp)
49
BURNERS
They can be removed and washed with
soapy water only.
They will remain always perfect if
cleaned with products used for silver-
ware.
After cleaning or wash, check that burn-
er-caps and burner-heads are dry
before placing them in the
respective
housings
.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
Fig. 6.2
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor
F
and the cap
C
has been correctly positioned (see figs.
6.1-6.2) - failure to do so can cause
serious problems.
Check that the electrode “
S
” (figs. 6.1 -
6.3) is always clean to ensure trouble-
free sparking.
Check that the probe “
T
” (figs. 6.1-6.3)
next to each burner is always clean to
ensure correct operation of the safety
valves.
Both the probe and ignition plug must
be very carefully cleaned.
S
F
C
T
Fig. 6.1