M5XTR
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-276
4
Rev.1 P. 3 / 4
WIRING INSTRUCTIONS
■
SCREW TERMINAL
Torque
: 0.8 N·m
EXTERNAL VIEWS
■
LEFT VIEW
■
FRONT VIEW
DIP SW
1
2
3
4
5
6
SW1
On
Status Indicato LED
Configurator Jack
OUTPUT RANGING
Use PC Configurator Software (model: M5CFG) to select input types.
The internal DIP switch setting is required to select I/O types before setting a precise output range using PC Configurator
Software (model: M5CFG).
For detailed information on the PC configuration, refer to the M5CFG users manual.
Table 1. DIP switch setting: Output type
Output
Type
SW1
1
2
3
4
5
6
0 – 20 mA
ON
OFF
OFF
OFF
ON
OFF
-5 – +5 V
OFF
ON
ON
OFF
OFF
ON
-10 – +10 V
OFF
ON
OFF
ON
OFF
ON
CHECKING
1) Terminal wiring: Check that all cables are correctly con-
nected according to the connection diagram.
2) Check DIP switch setting.
3) Power input voltage: Check voltage across the terminal
7 – 8 with a multimeter.
4) Input: Check that the input signal is within 0 – 100% of
the full-scale.
5) Output: Check that the load resistance meets the de-
scribed specifications.