MODEL: M2PRU
PERFORMANCE
Response time: 25 μsec. + input cycle + output cycle
(time required for the first pulse to be output from a train of
pulse input)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
STANDARDS & APPROVALS
CE conformity:
EMC Directive (2004/108/EC)
EN 61000-6-4 (EMI)
EN 61000-6-2 (EMS)
Low Voltage Directive (2006/95/EC)
EN 61010-1
Installation Category II
Pollution Degree 2
Max. operating voltage 300V
Input or output to power: Reinforced insulation
Input to output
Open collector/voltage pulse output: Basic insulation
AC/DC switch output: Reinforced insulation
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D hazardous locations
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010B-1, CAN/CSA-C22.2 No.1010-1)
EXTERNAL VIEW
Scaling Factor
Pulse Width Adj.
Pulse Width
Range Selector
*
Settings 7 through 9 are invalid.
No pulse output with these settings.
The front cover cannot be opened to 180 deg.
when flush with neighboring units.
■
FRONT VIEW (with cover open)
■
RIGHT SIDE VIEW
Pulse Sensing Type Selector
DC
AC
: DC coupling
: Capacitor coupling
DC
AC
(A) 10
–1
(B) 10
–2
(C) 10
–3
(D) 10
–4
(E) 10
–n
*
Refer to the instruction manual for detailed procedures.
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
www.sentronic.com
Produkte, Support und Service
SENTRONIC
AG