JC-ECT
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-9043 P. 3 / 5
MOUNTING INSTRUCTIONS
■
DIN RAIL MOUNTING
• Mounting
1) Hook the upper hook at the rear side of the base onto the
DIN rail.
2) Push the lower part of the unit in the direction of the ar-
row until the base is firmly fixed to the DIN rail.
1
2
• Dismounting
1) Push down the slider using the tip of a minus screwdriver.
2) Pull out the lower part of the unit.
3) Remove the upper part of the unit from the DIN rail.
1
2
3
■
SURFACE MOUNTING
1) Insert the mounter slider along the rail at the back of the
unit as shown below, and push in the rail until it clicks
once.
1
2) Fix the unit with M4 screws referring to “MOUNTING
REQUIREMENTS unit: mm (inch)” on page 5.
(Torque: 1.4 N·m)
