ABF3
P. 4 / 5
EM-2614 Rev.5
SETTING PROCEDURE
LED ON
Display Selector
■
SWITCHING BETWEEN DIGITAL DISPLAY / SETTING MODES
■
SETTING MANUAL OUTPUT (CAS Mode to MAN Mode)
PV
(red)
CAS
(red)
MV
(red)
MV
(red)
MODE
(red)
PV
(green)
MODE
(green)
MV
(green)
CAS
(green)
IND
OUT
LED ON
CAS-MAN Selector
MAN Control Buttons
MAN Control Buttons
Keep
pressing
Terminal Block
9 – 10
Closed
Using CAS-MAN Selector
Increase / Decrease
Switching by remote
command (contact)
SET
*
1. OUT Switch cannot be controlled when PV, CAS, MV or MODE LED shows green.
*
2. Setting and cancelling MAN Mode must be executed using the same method.
If you have set MAN Mode by using OUT Switch, you cannot cancel it by the remote command.
*
3. When switched from MAN to CAS Mode, the LED position prior to the MAN Mode switching will be recovered.
MAN
■
MANUAL OPERATION RAMP RATE, RETROACTIVE TIME PERIOD, TRANSITION RAMP RATE
PV
(green)
IND
LED ON
Display Selector
Manual operation ramp rate
Increase / Decrease
Retroactive time period
at switching CAS to MAN
Transition ramp rate
at switching MAN to CAS
SET
CAS
(green)
IND
Increase / Decrease
SET
MV
(green)
IND
Increase / Decrease
SET
■
CANCELLING MANUAL OUTPUT (MAN Mode to CAS Mode)
PV
(red)
OUT
LED ON
CAS-MAN Selector
Keep
pressing
Terminal Block
9 – 10
Open
MAN Mode set by
using CAS-MAN Selector
MAN Mode set by
remote command (contact)
SET
CAS
*
1,
*
2
*
1
*
1
*
3
