173
47DAC OPERATING MANUAL EM-9518-B Rev.4
21.2 ON TIMING DELAY
21.2.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the settings.
1
Hold down Alarm/
↓
and Scale/
↑
buttons at once for 3 seconds
or more to move on to Advanced Setting Mode.
• The event trigger mode is indicated.
• The SD indicates ‘EVENT’.
2
Press Alarm/
↓
or Scale/
↑
button to go to the ON timing delay
setting.
• The ON timing delay is indicated.
• The SD indicates ‘ON-TDLY’.
NOTE
The ON timing delay is disabled with “normal” selected for the event trigger mode parameter.
3
Press Shift button to shift the display into the setting standby
mode. Then press Shift and Up buttons to set the ON timing
delay.
• The forth digit starts blinking, to which you can apply changes.
• Set within the range of 000.0 to 999.9.
1,2,
4
1,2,
4
3
3
Blinking
