![background image](http://html2.mh-extra.com/html/m-system/47-series/47-series_operating-manual_3059829208.webp)
208
47DR OPERATING MANUAL EM-9509-B Rev.7
34.2.2 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the settings.
1
Hold down Init/
↑
button for 3 seconds or more to move on to
Initial Setting Mode.
• The input type is indicated.
• The SD indicates ‘RTTYPE’.
IMPORTANT
Warm up the unit for 10 minutes or more before carrying out the Analog Output Adjustment.
2
Press Alarm/
↓
or Init/
↑
button to go to the analog output 0%
adjustment.
• The analog output 0% adjustment is indicated.
• The SD indicates ‘AADJ L’.
NOTE
Skip to Step 5 when the analog output 0% adjustment is not necessary.
3
Press Shift button to switch the signal to increase (indication
‘UP’) or decrease (‘DOWN’).
2,5,
8,9
1,2,
8,9
3,6
4,7
Blinking
Blinking
■
Increasing output
■
Decreasing output