Safety
Take Note! Th is safety symbol is found throughout this manual to call your attention to instructions
involving yourself and others working around the machine.
• Failure to follow these instructions can result in injury or death!
Th is symbol means
-- Attention!
-- Become Alert!
-- Your Safety is involved!
Signal words are used in this manual.
Caution: Indicate a potential hazardous situation that may result in injury.
Warning: Indicates a hazard situation that could result in serious injury or death.
Danger: Indicates a hazardous situation that needs to be avoided. It is you the operator that needs to be
aware of these dangers.
If you have any questions not answered in this manual please contact you dealer or
M K Martin Enterprise Inc
Tel: 519-664-2752
3950
Steffl
er
Rd 1-855-664-2752
Elmira On Ca N3B 2Z3
Fax: 519-664-3695
www.mkmartin.ca
Safety -- It,s in your interest!
Caution:
When attaching the Tool Caddy ensure all pins and locks are secure before driving away!
When unhitching the Tool Caddy, Lower the row units to the ground and position the jack,
before removing the drawbar pin. With the row unit raised, the hitch end may be too light to balance the
load on the rear. Th is may cause the front end to raise up unexpectedly and cause injury.
Th e Tool Caddy has high-pressure hydraulic lines!
Before using check for leaks, abrasions and kinks.
Wear safety glasses and gloves when checking for leaks. Use a piece of wood or cardboard to fi nd leaks, as
a fi ne stream of oil may not be visible but can still penetrate the skin and enter into the blood stream!
If skin is penetrated with an oil stream, seek medical attention immediately!
Use safety chain at all times!
3
