-4-
1
2
POWER
SUPPLY
LK-
LK+
+ -
2
1
Connect with 1R
Connect with 2W
LK-
LK+
+
-
4.2 Electric Lock Connection
5. Specifications
Power Supply:
DC 10~12V (Internal Power supply)
Consumption:
200mA in working state (latch not included)
Video Output:
75Ohm, 1Vp-p, CCIR standard (unless specified)
Camera:
76 degree, CCD camera with IR-LED
Working temperature:
-10ºC ~ 40ºC
•
Mode1:Door Lock Controlled With Dry Contact
•
Mode2:Door Lock Controlled With Internal Power
Must install external power supply
for lock,and nearly all kinds of
electronic lock can be used.
Incidentally,in this mode,you can
continue talking and monitoring
during unlock operation.
Note:
1.The external power supply must
be used according to the lock.
2.The inside relay contact is
restricted to AC or DC 24V/3A.
Note:
1.Electronic lock of power-on-to-
unlock shoule be used.
2.The door lock is limited to
12V,and holding current must be
less than 250mA
The lock can be directly connected
with the door station and the power
through monitor.During unlock
operation,the monitor will close
screen automatically.
