EN
12
MOUNTING THE WIRELESS
WALL SWITCH
The wireless wall switch is suitable and
designed to be used exclusively in dry
indoor spaces. Please ensure when boring
and drilling holes in the wall or when
securely fastening that no cables or
wires are damaged.
a.)
Carefully lift the front panel of the wire-
less wall switch (e.g. using a flat-head
screwdriver as a lever) and set it aside.
b.) Detach the mounting plate. The mounting
plate of the wireless wall switch is secured
to the electronic component of the wireless
wall switch with 4 clips.
c.) The mounting plate has two mounting
holes. Using the mounting plate, mark the
mounting holes on the wall.
d.) Drill the mounting holes. Alternately, you
can also mount the wireless wall switch
using a double-sided bonding tape.
e.) Fasten the mounting plate using an
appropriate mounting material at the
designated spot of installation.
f.) Fasten the electronic component of the
wireless wall switch on the mounting plate.
g.) Place one 3 V (type: CR2477) battery
with correct polarity into the battery
compartment of the wireless wall switch.
h.) Secure the front panel back to the wireless
wall switch.
