M-E ADF-210, Operating Instructions Manual

Page: 26 / 68

ENGLISH | ADF-210
ADF-210 | ENGLISH
26
a) Batteries
Open the battery compartment (14) on the outdoor unit
and insert 3 pieces of micro batteries (AAA) according to
the polarity indicated in the battery compartment. Then
close the battery compartment again.
b) External Power Supply
To do this, connect the line of the external power source
(e.g. bell transformer 8-24V DC) to the connection
terminal (16) of the outdoor unit. It is not necessary to
pay attention to the polarity.
Indoor unit
Connect the supplied AC adapter first to the corresponding
socket on the side of the indoor unit and then to the
AC power supply (230V / 50 Hz).
Pairing - How to pair indoor and outdoor unit
1. In standby mode, briefly press the RESET buttons
(6 or 15) on the indoor and outdoor units (in any
order). The LED indicator flashes rapidly.
2. When pairing is successful, the pairing mode is
automatically exited and the LED indicators turn off.
Note : If the LED display on the outdoor unit does not
flash after pressing the reset button, first press the call
button and then press the reset button briefly.