INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD
1. GENERAL
1.1 TRANSPORT AND INSTALLATION
• Transport the Luna in an upright position, or, in encumbering
circumstances, at an angle of 45°.
• The handles for transportation purposes have been attached
inside the slots provided on the sides of the Luna (see Pic.1)
• A set of rubber straps that can be turned and a set of fixed
rubber straps are available as an option.
This is to facilitate transport on-site and on the stairs.
• Check to see that the lifting door functions properly before
fitting the Luna GOLD (see Pic.2).
1.2 FUEL
1.2.1 Wood
The quality of the wood is extremely important for the optimal
functioning of the stove (output, clear glass, etc.).
Good quality wood is wood that has been dried under an aerated
shelter for at least 2 years (+ 18% moisture content). Damp wood
gives off less heat and dirties the stove and the chimney less.
You can also use briquettes (the effect is comparable with that of
wood), and it is best to use them in combination with wood
because burning only briquettes makes the temperature too
high.
Never fill the stove with wood because when the chimney draws
too much, it can make the temperature too high. Damage as a
result of excessive temperature is not under guarantee. 3 wooden
logs are equal to 12 kW.
1.2.2 Forbidden fuel
The use of treated wood (painted, etc.) and all types of household
waste, which can disperse hazardous gases, is FORBIDDEN and
CANCELS OUT ANY CLAIM ON THE GUARANTEE. The use
of fluid fuel (petrol, etc.) is also forbidden.
Pic. 1
Pic. 2
4
