manualshive.com logo in svg

M Design LUNA 850 V Gold Gas, Instructions For Installation And Use Manual, Page: 10 / 12

Share
Download
M Design LUNA 850 V Gold Gas Instructions For Installation And Use Manual Download Page 10

INSTALLATIEVOORSCHRIFT EN GEBRUIKSAANWIJZING - LUNA 1000-1300-1600 H GOLD - GAS

INSRUCTION D’INSTALLATION ET D’UTILISATION - LUNA 1000 -1300-1600 H GOLD - GAZ

M-DESIGN 

10

9

1

2

3

4

5

6

7

8

0

INSTALLATIEVOORSCHRIFT EN GEBRUIKSAANWIJZING - LUNA 850 V GOLD - GAS

INSRUCTION D’INSTALLATION ET D’UTILISATION - LUNA 850 V GOLD - GAZ

M-DESIGN 

10

7. PUTTING IN PLACE THE LOGS, DIAMOND, SAPPHIRE AND WHITE STONES

• 

Please check that the pilot light is switched off and that the furnace has cooled down.

• 

Move the window to the front by pulling it. The window tips open at 45°. 

• 

Arrange the materials supplied. In accordance with your order you will have either a set of logs, diamond, sapphire or white pebbles. There 

is an adequate supply of materials . Our appliance is approved with these materials, so please do not use other products. Other decorative products 

are prohibited in our appliances. Please do not change the delivered quantities.

ARRANGING THE SET OF LOGS

Caution: do not put anything on the pilot light. To arrange the logs respect the order as follows.

 

 

Summary of Contents for LUNA 850 V Gold Gas













Reviews:

No comments