INSTRUCTION FOR INSTALLATION AND USE - INTERRA - WOOD
INTERRA has been designed so that it is easy to install.
The combustion chamber can be completely slid out of the encasement. This makes it
easy for one single person to easily install the appliance and a second person is only nece
-
sarry to help a few minutes to slide the combustion chamber back in. In this way, one can
later still work on the chimney in the case of certain problems, without having to remove
the stove completely
2. INSTALLATION
2.1 ACTIONS TO BE TAKEN UPON INSTALLATION
Your supplier is the specialist who chose to represent M-design in your area. For
your own safety and satisfaction, we advise you to entrust him with the installation.
The appliance has to be installed according to certain prescribed rules and local regula
-
tions.
However, if you decide to carry out the work on your own, we advise you to do the fol
-
lowing:
• Refer to the terms and conditions of our contract of guarantee.
• Ask your supplier for advice on how to comply with regulations.
• Tolerances of appliance from combustibles : 30cm
without stand
with stand
Installation :
• Open the door
• Remove the smoke damper and the baffle plate.
• You can slide the combustion chamber out of the encase
-
ment, but it is not obligatory.
• Assemble the encasement and make the necesaary con
-
nections
• When everything is connected you can put the combu
-
stian chambre in place ( in the case you removed it first )
Remark : In some situation it’s easy to install the fireplace with an optionally stand.
5