M Confort LIGHT, User Manual

Page: 4 / 19

WARNING : NEVER place hands under the heating elements.
21 .ALWAYS allow heating element to cool at least 10 minutes before touching the heating
tube or adjacent part
22. This product contains recyclable materials. Do not dispose this product as unsorted
municipal waste. Please contact your local municipality for the nearest collection point.
CLEANING AND MAINTENANCE
Regular and careful cleaning helps your infrared heater operate efficiently for many trou-
ble free years. To clean your heater follow steps below.
Unplug the power cord for your safety before cleaning your appliance.
1. Make sure the heater is cool before continuing
2. To keep the heater clean, the outer shell maybe cleaned with soft, damp cloth. After cleaning,
dry the unit with a soft cloth.(CAUTION: DO NOT let liquids enter the heater)
3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
4. DO NOT immerse the heater in water
5. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt
build up. Use packaging carton.
ASSEMBLY INSTRUCTIONS
Tools Needed:
* Pencil *Hammer *Level *Screw Driver *Power Drill and drill bits
A wall mounting bracket is provide with the heater which has been specifically designed to allow
this product to be fitted to a wall or ceiling before drilling the holders for the wall/ceiling is solid
and that there are no hidden water pipes or electric wires. The heater must be installed no less
than 16’’ form side walls and no less than 6”’ off the floor.