M-B MSV, Maintenance And Service Manual

Page: 175 / 427

Installation 37/56
RE 93221-01-B/07.2013, A22VG Series 40, Bosch Rexroth AG
Table 11: Tightening torques of the female threads and threaded plugs
Ports
Maximum permissible
tightening torque of the
female threads M
G max
Required tightening torque of
the threaded plugs M
V
WAF
hexagon socket of the
threaded plugs
Standard Thread size
ISO 11926 5/16-24 UNF-2B 10 Nm 7 Nm 1/8 in
3/8-24 UNF-2B 20 Nm 10 Nm 5/32 in
7/16-20 UNF-2B 40 Nm 18 Nm 3/16 in
9/16-18 UNF-2B 80 Nm 35 Nm 1/4 in
3/4-16 UNF-2B 160 Nm 70 Nm 5/16 in
7/8-14 UNF-2B 240 Nm 110 Nm 3/8 in
1 1/16-12 UN-2B 360 Nm 170 Nm 9/16 in
1 5/16-12 UN-2B 540 Nm 270 Nm 5/8 in
1 5/8-12 UN-2B 960 Nm 320 Nm 3/4 in
1 7/8-12 UN-2B 1200 Nm 390 Nm 3/4 in
To connect the axial piston unit to the hydraulic system:
1. Remove the protection plugs and threaded plugs at the ports at which the
connections are to be made according to the hydraulic schematic.
2. Make sure that the sealing surfaces of the hydraulic ports and functional surfaces
are not damaged.
3. Use only clean hydraulic lines or flush them before installation. (Note chapter 7.5
“Performing flushing cycle” on page 38 when you flush out the complete
system.)
4. Connect the lines in accordance with the installation drawing and the machine
or system schematic. Check whether all ports are connected or plugged with
threaded plugs.
5. Tighten the fittings correctly (note tightening torques). Mark all correctly
tightened fittings, e.g. with a permanent marker.
6. Check all pipes and hose lines and every combination of connecting pieces,
couplings or connecting points with hoses or pipes to ensure they are in
condition for safe working.
For relationship between direction of rotation and flow direction, please refer to
data sheet 93221.
Procedure