Chapter 3: Using Venom Standalone
21
Venom User Guide
7
Press the Store button to save the Multi Part Pattern settings to the selected Bank and preset location.
To save the only the current settings of a Multi after editing Multi Parts:
1
Press the Store button. The Store button LED and the Multi Part button LEDs of any edited Multi Parts start
flashing. The LCD screen will ask “StoreWhat?” prompting you to select a Multi Part by pressing one of the
Multi Part buttons.
2
Press the Multi button. Only the Multi button will be flashing.
3
If desired, select a new storage location for the Multi Program:
• Press the Bank button to select the Bank where you want to save the current settings for the Multi Pro-
gram.
• Adjust the Value knob to select the preset location where you want to save the current settings for the
Multi Program.
4
If desired, rename the Multi Program:
• Press the button. In the Venom LCD, the first character of the program name starts flashing.
• Use the Value knob to change the character.
• Press button to move to the next character to the right for editing.
• Use the OCTAVE – button to move back to the next character to the left for editing.
5
Press the Store button to save the Multi Program settings to the selected Bank and preset location without
saving any changes to the Multi Parts.
To store additional Multi Part Patterns, ensure your keyboard is still in Multi mode, and repeat steps 2
through 7 until the “Edited” flag goes away.
Summary of Contents for Venom
Page 1: ...Venom User Guide ...
