M-Audio Trigger Finger Pro, User Manual

Page: 38 / 97

38
MIDI Channel and Output
The MIDI settings determine over which MIDI channel each pad sends its messages and
whether the messages are sent over Trigger Finger Pro's USB Port, MIDI Out jack, or both.
To change a pad's MIDI channel and output configuration:
1. Enter Pad Mode by pressing the Pad Mode Button (Pad) .
2. Press the second Function Button (Edit Pads) .
3. Press the third Function Button (More) .
4. Use the Pad Bank button to select the desired pad bank, and press the pad whose
velocities you want to edit.
5. Turn the fourth Assignable Knob (MIDI-Ch) to set the MIDI channel over which the pad
will send its messages ( 01 – 16 or UsePrefs ).
Press the first Function Button (Output) to cycle through the available MIDI output
configurations the pad can send its messages ( USB+Jack , USB , Jack , or UsePrefs ).
( Jack refers to Trigger Finger Pro's MIDI Out jack.)
For either setting, when UsePrefs is selected, the pad will use whatever settings are in
Trigger Finger Pro's Preferences . See the Preferences: MIDI chapter to learn more
about this.
6. Make other changes in Pad Mode, or exit Pad Mode by pressing the Pad Mode Button
(Pad) or the fourth Function Button (Exit) twice.
TRIGGER PADS 01: Preset
PAD ON:
Green
PAD OFF:
Indigo
MIDI-CH:
UsePrefs MORE EXIT
BANK:A PAD:A01 SELECT->
PAD
OUTPUT:
UsePrefs